Multi Room Systems - Heat or cool 2, 3 or 4 rooms from only one outdoor unit
","linkList":[]},"dataItem-j5xhcmog1":{"type":"StyledText","id":"dataItem-j5xhcmog1","metaData":{"isPreset":false,"schemaVersion":"1.0","isHidden":false},"text":"Independent Control
\nEach indoor unit can be operated independently. This means that on / off, temperature, air movement, and time / clock operation can all be controlled from their own controller. (The multi system cannot be operated in heat and cool mode simultaneously).
\n\n
Flexible installation
\nFujitsu Multi systems can be installed in large buildings and over multiple floors due to the long maximum allowable pipe length.
\n\n
Maximum Pipe length
\n(each unit):
\n25m (AOTG24LAT3/30LBTA4)
\nMax. Height:
\n15m (AOTG24LAT3/30LBTA4)
\nTotal Piping Length:
\n50m (AOTG24LAT3)
\n4 Outdoor Units 70M (AOTG30LBTA4)
Innovative technology
\n\n\n\n
High efficiency / low noise large fan
\nNewly designed fans have been used to increase airflow efficiency, at the same time as significantly reducing sound pressure
\n\n
Heat exchanger
\nA new 3 row heat exchanger has been used which allows for a more compact outdoor unit with higher energy efficiency.
\n\n
DC fan motor
\nHigh performance and high efficiency has been achieved by using a new smaller DC Fan Motor.
\n\n
High efficiency DC Twin Rotary Compressor
\nA high performance, low noise, large capacity DC Twin Rotary Compressor is used.
10˚C heat operation
\nEach indoor unit can be operated independently. This means that on / off, temperature, air movement, and time / clock Operation starts and maintains the room temperature at 10˚C when the temperature drops below 10˚C.
\n\n
Economy operation
\nBy maintaining a slightly higher temperature in cool mode, lower temperature in heat mode and limiting the maximum current draw real energy savings are achieved